• Trinnov - Amplitude8 - Preamplifier Australia
  • Trinnov - Amplitude8 - Preamplifier Australia
Trinnov

Amplitude8

Preamplifier

Input Impedance
47 kOhms, each phase
Dimensions
(W x H x D) 443 x 186.5 x 502 mm
All specifications

Price on request

Available to order in store and by phone

Price on request

Tell us about your room and your system. We will come back with a quote and our recommendation, and set up a private listening session if you would like one.

(02) 8088 3088
Sound+Image Awards winner

Voted Australia's #1 Hi-Fi Retailer, Sound+Image Awards 2023. Family owned since 2010.

Hear the Amplitude8 before you decide

Book a private listening session in Belrose and ask for the Amplitude8: we will confirm what we can set up for you. Or audition it at home.

(02) 8088 3088

Set-up and installation

Our team can deliver, install and set up your system, from speaker placement to a full cinema calibration. Ask us for a quote when you order.

Returns

Your rights under Australian Consumer Law always apply. Read our returns policy.

Trinnov Amplitude8

Specifications

Connectors
1 Balanced (XLR) per channel on each module
Input Impedance
47 kOhms, each phase
Input Sensitivity
6.15V RMS balanced input (+18dBu) for 225W into 8 ohms
Polarity
Pin-2 = Positive, Pin-3 = Negative for Non-Inverting Output
Power Output (8 ohms)
225W RMS per channel with less than 0.05% THD from 20 Hz to 20 kHz
Power Output (4 ohms)
375W RMS per channel with less than 0.05% THD from 20 Hz to 20 kHz
Power Output (2 ohms)
500W RMS per channel with less than 0.05% THD from 20 Hz to 20 kHz
Frequency Response
±0.5dB from 0Hz to 20kHz, Load Independent
Damping Factor
> 6000 at 100 Hz; > 2000 at any frequency up to 20 kHz
Signal to Noise Ratio
125dB referenced to rated output (A-Weighted)
Crosstalk
85 dB
Power Requirements
117V AC, 15A Slo Blo main fuse; 230V AC 8A Slo Blo main fuse; 50/60 Hz
Power Consumption
< 1W at Standby; < 80W at idle; 1500W max when fully loaded
Trigger Input
5 to 12V DC; Steady State
Dimensions
(W x H x D) 443 x 186.5 x 502 mm

In detail

About the Amplitude8

Elevate Your Sound Experience with Amplitude8 - The Audiophile's Dream Amplifier

Immerse yourself in a sound experience like no other with the Amplitude8, designed to integrate seamlessly with your Altitude32 A/V preamp. Boasting two linear power supplies powered by heavy-duty toroidal transformers, the Amplitude8 delivers a powerful, three-dimensional soundstage, dynamic range, and bass impact that rivals the best commercial theaters.

By appointment

Hear it in a real room.

Specifications only tell half the story. Book a private listening session in our Belrose showroom, bring the music you know best, and ask for the Amplitude8.

(02) 8088 3088
Sound+Image Awards winner

Voted Australia's #1 Hi-Fi Retailer, Sound+Image Awards 2023

Family owned since 2010
Talk to the people who will look after you.
Listen in Belrose
Private listening sessions, by appointment.
Designed and installed
Cinemas and listening rooms by our own team. (02) 8088 3088

Pairs with the Amplitude8

Complete the system

  • Accuphase

    C-3900S

    Preamplifier

    Price on request

  • Accuphase

    C-2900

    Preamplifier

    Price on request

  • Accuphase

    C-57

    Phono Preamplifier

    Price on request

  • Accuphase

    C-2300

    Preamplifier

    Price on request

  • Fyne Audio

    F1-10S

    Floor Standing Speakers

    Price $59,995

More from Trinnov

Shop Trinnov