- Impedance
- 4 ohms
- Sensitivity
- 87 dB
- Frequency Response
- 24 Hz – 21 kHz ± 3 dB (in room)
- Weight
- 74.8lb / 34kg
Price $26,995
Includes GST
Voted Australia's #1 Hi-Fi Retailer, Sound+Image Awards 2023. Family owned since 2010.
Hear the Wind Design before you decide
Book a private listening session in Belrose and ask for the Wind Design: we will confirm what we can set up for you. Or audition it at home.
Delivery and collection
Free standard shipping on orders of $300 or more within Australia, and $15 on smaller orders. Western Australia is quoted on request.
Pick up from our Belrose showroom: call ahead so we can have it ready.
Set-up and installation
Our team can deliver, install and set up your system, from speaker placement to a full cinema calibration. Ask us for a quote when you order.
Returns
Your rights under Australian Consumer Law always apply. Read our returns policy.
Totem Acoustic Wind Design
Specifications
- Frequency Response
- 24 Hz – 21 kHz ± 3 dB (in room)
- Recommended Power
- 80 – 250 W
- Woofer
- 8.5″ / 21.59 cm cast frame, specially damped.
- Midrange
- 2×5.5″ with 3″ / 7.62 cm voice coil. Cast frame. High power handling, wrap around neo magnet structure, accurate linear throw
- Tweeter
- 1″ / 2.54 cm alloy dome flexible linear suspension, low resonance, chamber
- Impedance
- 4 ohms
- Sensitivity
- 87 dB
- Dimensions (w x h x d)
- 10.7″ x 44.3″ x 14″ / 27.18 x 112.522 x 35.56 cm (over max. size)
- Placement from rear wall
- 3′ – 7′ / 91.44 – 213.36 cm
- Placement distance apart
- 6′ – 14′ / 182.88 – 426.72 cm
- Break-in Time
- 200 – 250 hours
- Crossover Frequency
- Woofer to mids, 2nd order / 2nd order, mids to tweets 2nd order 2nd order
- Speaker Terminals
- Bi-wireable, Gold WBT connectors
- Weight
- 74.8lb / 34kg
In detail
About the Wind Design
Going a step further than the original Wind Floorstanding, the Wind Design is refined to the highest sonic tolerances. With its hand-selected drivers and exclusive crossover components, the Wind Design offers ultra-broad all-axis sound staging performance. Designed like a musical instrument, the Wind Design delivers sonic expressivity to the absolute, pulling you inside the music.
Dressed for uncompromising musical renditions, the Wind Design’s six-layer multicoated finishes results in additional structural rigidity. The deep luster finish not only adds shine but also allows for a more cohesive acoustic behavior. At the base of the front baffle is a new articulating claw that is adjustable for slanting back the baffle for precise spatial alignment. The rear skid-plate decoupling system allows for additional spatial performance.
Design Highlights
- Avant-garde design
- Superior sonic architecture
- Complex cabinet geometry
- Absolute surreal holographic imaging
- Design 6-layer multicoated polyester design finishes
Technical Features
- Exclusive (4x) driver 3-way speaker system
- On- and off-axis point source imaging
- Specially damped, long-throw woofer
- Special low resonance tweeter with chamber
- Multiple midranges
- Extreme-quality hard-wired crossover
By appointment
Hear it in a real room.
Specifications only tell half the story. Book a private listening session in our Belrose showroom, bring the music you know best, and ask for the Wind Design.
Voted Australia's #1 Hi-Fi Retailer, Sound+Image Awards 2023
- Family owned since 2010
- Talk to the people who will look after you.
- Listen in Belrose
- Private listening sessions, by appointment.
- Designed and installed
- Cinemas and listening rooms by our own team. (02) 8088 3088
Pairs with the Wind Design
