CONNECT 124D

Name: LEA - CONNECT 124D - Amplifier
Brand: LEA
SKU: CONNECT 124D
Price: 2895.0 AUD
Availability: InStock

Amplifier

Price $2,895

Includes GST

Voted Australia's #1 Hi-Fi Retailer, Sound+Image Awards 2023. Family owned since 2010.

Hear the CONNECT 124D before you decide

Book a private listening session in Belrose and ask for the CONNECT 124D: we will confirm what we can set up for you. Or audition it at home.

(02) 8088 3088

Set-up and installation

Our team can deliver, install and set up your system, from speaker placement to a full cinema calibration. Ask us for a quote when you order.

Returns

Your rights under Australian Consumer Law always apply. Read our returns policy.

LEA CONNECT 124D

Specifications

INPUTS: INPUTS
Analog: 4 Balanced Inputs with user-selectable 26dB, 34dB, and mic-level sensitivity
Note: Unbalanced and RCA inputs share the same analog input channel
Dante: 4 x 4 Dante at 48kHz, Multicast or Unicast
AES67: Configurable via Dante Controller software
THD+N: 0.1% (20Hz to 20kHz)
Frequency Response: 20Hz to 20kHz, ±0.5 dB @ 4Ω, 8Ω, 70V, 100V; -2.5dB @ 20kHz at 2Ω
Signal to Noise Level: 102dB (20Hz to 20kHz referenced to 8Ω)
Crosstalk: 70dB (20Hz to 20kHz)
Amplifier Output Classification: Class D with Proprietary Smart Power Bridge Technology allowing bridged output without sacrificing a channel
DSP: DSP
DSP Architecture: Analog Devices Sigma 96kHz DSP Processor with 32-bit Core and Sample Rate Converters
Input Matrix: Routable matrix; any input to any output with primary and secondary input priority
Crossovers: Up to 48 dB/Octave IIR Filters (Linkwitz Riley and Butterworth)
Parametric EQ: 8 Band Parametric EQ per channel
Output Delay: 100ms per channel
Output Protection: DC, VHF, and AC Mains Protection, Overtemp and Current Limiter, Fan Fault Detection
User Adjustable Limiting: Peak Voltage and RMS Voltage
Load Monitoring: Real-time Load Monitoring and Pilot Tone Detection from Internal or External Sources
CONTROL, MONITORING, NETWORKING: CONTROL, MONITORING, NETWORKING
User Interface: Web Browser Interface, 3rd Party API Control, Cloud Control, SharkWare
External I/O: I/O In: Toggles Remote On/Off I/O Out: Indicates Amplifier Health 4 General Purpose I/O Pins Triggering/output statuses – Coming Soon
OPERATION: OPERATION
AC Mains: 100VAC – 240VAC ±15%, 50Hz or 60Hz
Power Supply: Universal Switch Mode Power Supply
PHYSICAL: PHYSICAL
Dimensions (L × W × H): Product: 11.82” × 8.58” × 1.71” (300.11mm × 218mm × 43.5mm) Shipping: 18” × 11” × 2.75” (457.2mm × 300mm × 69.85mm)
Weight: Product: 7lbs / 4.1kg Shipping: Coming Soon
Cooling: Front to Rear Variable Fan Speed Cooling
Fan Noise: Idle: 50dB @ 1m 50% Speed: 57dB @ 1m Full Speed: 63dB @ 1m

In detail

About the CONNECT 124D

The Connect Series 124D delivers one of the most feature-rich amplifier experiences available in the industry – in a smaller form factor. Featuring 96kHz DSP, WebUI, SharkWare, LEA Cloud, third-party APIs, speaker tunings, and more—this amplifier is the right choice for your next install. The Connect Series Half-Rack is built with fully routable analog inputs, four amplifier channels with Lo-Z, 70V, or 100V selectable by channel and D-units include Dante and AES67 connectivity. All models boast three different ways of network connection: using the built-in Wi-Fi Access Point, connecting to an existing Wi-Fi network, or using a Local Area Network Ethernet connection.

By appointment

Hear it in a real room.

Specifications only tell half the story. Book a private listening session in our Belrose showroom, bring the music you know best, and ask for the CONNECT 124D.

(02) 8088 3088

Voted Australia's #1 Hi-Fi Retailer, Sound+Image Awards 2023

Family owned since 2010: Talk to the people who will look after you.
Listen in Belrose: Private listening sessions, by appointment.
Designed and installed: Cinemas and listening rooms by our own team. (02) 8088 3088