Price on request
Voted Australia's #1 Hi-Fi Retailer, Sound+Image Awards 2023. Family owned since 2010.
Hear the Cyclonix 11 before you decide
Book a private listening session in Belrose and ask for the Cyclonix 11: we will confirm what we can set up for you. Or audition it at home.
Set-up and installation
Our team can deliver, install and set up your system, from speaker placement to a full cinema calibration. Ask us for a quote when you order.
Returns
Your rights under Australian Consumer Law always apply. Read our returns policy.
Krix Cyclonix 11
Specifications
- Impedance4 Ohms
- Low Frequency Driver, Nominal 275mm (11”) diameter doped paper cone driver, 50mm (2”) voice coil wound on high powered Kapton former with vented magnet assembly
- Sensitivity90 dB SPL (2.83V / 1m)
- Weight, 17 kg
Frequency Range
30Hz-200Hz in room response
Amplifier Power
200 – 350 Watts RMS recommended amplifier power
Recommended Processing
High Pass Filter: 30 Hz 24dB / Octave Butterworth
Limiter: 350W (4 Ohms)
Inputs
High current spring terminals featuring a 5mm hole to accept up to 10AWG cable
Enclosure Type
Bass reflex, down firing vent
Dimensions
700mm high x 540mm wide x 175mm deep (195mm deep with optional grille)
In detail
About the Cyclonix 11
CYCLONIX 11
SUBWOOFER
- Supporting subwoofer for Series MX systems
- Can also be used as a primary subwoofer
- Shallow design allows for greater placement options
This low-profile, passive subwoofer will deliver formidable low frequency performance as a supporting subwoofer for an MX-5, or as a standalone subwoofer in a Series SX system.
EXPERIENCE BASS
The Cyclonix range of subwoofers are designed for edge-of-your-seat bass performance in dedicated home cinema rooms.
Their shallow depth allows them to be placed inconspicuously against a side or back wall as supporting subwoofers to a Series MX system. They can also be used as the main subwoofers in a dedicated home cinema system – either behind an acoustically transparent screen or elsewhere in the room.
The Cyclonix 11 has taken its design cues from the subwoofer modules in the MX-5 system, foregoing the acoustic absorbent material on the front baffle and instead offering an optional black cloth grille.
The 275mm bass driver features a 50mm voice coil with ventilated magnet system. The single down-firing vent is tuned to achieve maximum output, while the proprietary Krix rubber feet provide improved acoustic isolation on hard and soft floor surfaces.
A separate power amplifier is required for this subwoofer and can be connected to the LFE output of any AV processor or receiver.
For the ultimate cinema experience at home, play it through Krix.
By appointment
Hear it in a real room.
Specifications only tell half the story. Book a private listening session in our Belrose showroom, bring the music you know best, and ask for the Cyclonix 11.
Voted Australia's #1 Hi-Fi Retailer, Sound+Image Awards 2023
- Family owned since 2010
- Talk to the people who will look after you.
- Listen in Belrose
- Private listening sessions, by appointment.
- Designed and installed
- Cinemas and listening rooms by our own team. (02) 8088 3088
Pairs with the Cyclonix 11
Complete the system
- CASHBACK
More from Krix
Shop Krix- Pre-order
- Pre-order
- Pre-order
- Pre-order