SAVE 10%
- Impedance
- 4 + 4 Ω
- Dimensions, horizontal (H x W x D)
- 584 x 1200 x 574 mm (including feet)
- Weight
- 91 kg total
Price on request
Voted Australia's #1 Hi-Fi Retailer, Sound+Image Awards 2023. Family owned since 2010.
Hear the UCX-218 before you decide
Book a private listening session in Belrose and ask for the UCX-218: we will confirm what we can set up for you. Or audition it at home.
Set-up and installation
Our team can deliver, install and set up your system, from speaker placement to a full cinema calibration. Ask us for a quote when you order.
Returns
Your rights under Australian Consumer Law always apply. Read our returns policy.
Krix UCX-218
Specifications
- Type
- Passive sealed subwoofer, dual opposing drivers
- Low frequency drivers
- 2 x 460 mm (18") treated paper cone, 100 mm (4") voice coil, neodymium magnet, 50 mm peak to peak displacement
- Frequency range
- 10 Hz to 200 Hz (with DSP); 15 Hz at -3 dB, 13 Hz at -6 dB (with DSP)
- Power handling
- 2 x 1250 W continuous, 2 x 2500 W program, 2 x 5000 W peak
- Recommended amplifier
- 2 x 1500 to 3000 W into 4 Ω, or 1 x 3000 to 6000 W into 2 Ω (parallel); approved amplifier with DSP required
- Impedance
- 4 + 4 Ω
- Enclosure
- Sealed, durable textured black paint
- Input terminals
- Krix high current binding posts with 8 mm hole
- Dimensions, horizontal (H x W x D)
- 584 x 1200 x 574 mm (including feet)
- Dimensions, vertical (H x W x D)
- 1210 x 574 x 574 mm (including feet)
- Weight
- 91 kg total
In detail
About the UCX-218
Overview
The Krix UCX-218 is a sealed, passive infrasonic subwoofer for dedicated home cinemas, with two 460 mm (18") drivers in an opposing driver configuration. Krix rates its frequency range at 10 Hz to 200 Hz with DSP. The cabinet can stand horizontally or vertically, finished in Cinema Black.
Design
- Dual opposing drivers: Krix states the opposing layout eliminates transfer of unwanted vibration into the cinema room.
- Horizontal or vertical: feet can be fitted to the end for vertical use, for single or multi subwoofer layouts.
- Amplification: external amplification and DSP are required. Krix-optimised DSP presets are included for the Krix KA-27000X4 and KA-1000X4 amplifiers, and Krix-optimised DSP settings are available for the CONNECT 1504 and CONNECT 1504D.
- Three assemblies: two 40 kg driver assemblies (UCX-218.D) and an 11 kg manifold assembly (UCX-218.M).
- Australian made: Krix has engineered and built speakers in Australia since 1974.
Specifications are as published by Krix. Krix recommends consulting a Krix Certified System Designer for the approved amplifier list and full sensitivity and maximum sound level figures.
By appointment
Hear it in a real room.
Specifications only tell half the story. Book a private listening session in our Belrose showroom, bring the music you know best, and ask for the UCX-218.
Voted Australia's #1 Hi-Fi Retailer, Sound+Image Awards 2023
- Family owned since 2010
- Talk to the people who will look after you.
- Listen in Belrose
- Private listening sessions, by appointment.
- Designed and installed
- Cinemas and listening rooms by our own team. (02) 8088 3088
Pairs with the UCX-218
Complete the system
- SAVE 10%
- CASHBACK
More from Krix
Shop Krix- Pre-order
- Pre-order
- Pre-order
- Pre-order
- Pre-order
