- Recommended Load Impedance
- 47 k ohms
- Frequency Response
- 20 to 25,000 Hz
- Weight
- 20.3 g (0.72 oz)
Price $439
Includes GST
Voted Australia's #1 Hi-Fi Retailer, Sound+Image Awards 2023. Family owned since 2010.
Hear the AT-VM740xML/H before you decide
Book a private listening session in Belrose and ask for the AT-VM740xML/H: we will confirm what we can set up for you. Or audition it at home.
Delivery and collection
Free standard shipping on orders of $300 or more within Australia, and $15 on smaller orders. Western Australia is quoted on request.
Pick up from our Belrose showroom: call ahead so we can have it ready.
Set-up and installation
Our team can deliver, install and set up your system, from speaker placement to a full cinema calibration. Ask us for a quote when you order.
Returns
Your rights under Australian Consumer Law always apply. Read our returns policy.
Audio Technica AT-VM740xML/H
Specifications
- Cartridge & Stylus
- Cartridge & Stylus
- Frequency Response
- 20 to 25,000 Hz
- Channel Separation
- 25 dB (1 kHz)
- Vertical Tracking Angle
- 20°
- Tracking Force
- 1.8 to 2.2 g (2.0 g standard)
- Stylus Construction
- Nude Microlinear
- Recommended Load Impedance
- 47 k ohms
- Coil Impedance
- 3.2 k ohms (1 kHz)
- DC Resistance
- 750 ohms
- Coil Inductance
- 480 mH (1 kHz)
- Output Voltage
- 3.2 mV (1 kHz, 5 cm/sec.)
- Output Balance
- 1.0 dB (1 kHz)
In detail
About the AT-VM740xML/H
The AT-VM740xML/H combo kit includes the AT-VM740xML microlinear dual moving magnet cartridge premounted on the AT-LT10 universal 1/2"-mount headshell. The AT-VM740xML is part of the updated AT-VMx series, which introduces material and design changes to further refine the VM sound, offering responsive playback that is especially sensitive to the dynamism of musical expression.
The paratoroidal coil construction of the cartridge’s generator – two PCUHD coils per channel, one stacked behind the other – greatly improves electromagnetic performance, while a slight reduction in coil turns* enhances transient response for clean, lifelike sound.
Since all AT-VMx and VM Series cartridges share the same body design and have a removable stylus, you can use almost any AT-VMNx or VMN replacement stylus* with any VMx or VM cartridge for easy experimentation with sound characteristics.
Features
AT-VM740xML Dual Moving Magnet Cartridge
- AT-VMx dual moving magnet cartridge with microlinear stylus
- Microlinear stylus tracks the record groove with incredible accuracy, providing more nuanced sound reproduction than elliptical and conical styli
- Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response
- PCUHD (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response
- Center shield plate between the left and right channels reduces crosstalk for clear stereo sound
- Die-cast aluminum housing reduces vibrations and resonance
- Threaded inserts make cartridge easier to mount, especially to integrated tonearms
- V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record
- Aluminum tapered cantilever reduces mass near the stylus tip for quicker signal transmission
- Compatible with any turntable headshell that accepts 1/2" cartridges
- Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application
By appointment
Hear it in a real room.
Specifications only tell half the story. Book a private listening session in our Belrose showroom, bring the music you know best, and ask for the AT-VM740xML/H.
Voted Australia's #1 Hi-Fi Retailer, Sound+Image Awards 2023
- Family owned since 2010
- Talk to the people who will look after you.
- Listen in Belrose
- Private listening sessions, by appointment.
- Designed and installed
- Cinemas and listening rooms by our own team. (02) 8088 3088
Pairs with the AT-VM740xML/H
