Audio Technica AT-LP7 Fully Manual Belt-Drive Turntable

Audio Technica

If you are looking for a well built fully manual turntable with built-in phono stage the brand new Audio Technica AT-LP7 should be at the top of your list. Audio Technica have applied their many years in the industry to design a simple to use high performance offering that will get the best from your vinyl collection. Cartridge and dust cover are included, the phono stage offers Moving Magnet and Moving Coil phono options to allow flexibility, what more could you ask for.


Type: Turntable



Audio-Technica began in 1962 as a designer and manufacturer of high-end phonograph cartridges, bringing to the audio world the innovative Dual Moving Magnet stereo cartridge with its outstanding channel separation, extended frequency response and superb tracking. 


The AT-LP7 builds on this heritage. Recognising the critical role a cartridge plays in reproducing high-fidelity audio from vinyl, we designed this fully manual, belt-drive turntable around our VM cartridge line, incorporating the finest materials and structures in support of the cartridge’s performance.

The AT-LP7 comes with a VM520EB Dual Moving Magnet Cartridge with a 10 g AT-HS10 headshell and 0.3 x 0.7 mil elliptical bonded stylus. That stylus can be replaced with any of the other six styli available in the VM line, giving users an easy means of upgrading the stylus without buying a whole new cartridge. 
The headshell attaches to a J-shaped tone arm that takes its inspiration from the classic A-T models of the 1960s and ’70s. The tone arm features a metallic gimbal suspension system and precision bearings to mitigate tracking errors, and includes an adjustable counterweight and anti-skate control. The height of the tone arm can be adjusted from 0 mm to 6 mm to accommodate a wide variety of cartridges. 


The turntable chassis is constructed of 40 mm-thick MDF (medium density fiberboard), an excellent anti-vibration damping material that limits low-frequency acoustical feedback. The anti-resonance platter is made of 20 mm-thick polyoxymethylene and is driven by a sensor-monitored motor that ensures a continuously accurate platter rotation speed of 33-1/3 or 45 RPM.

The AT-LP7 also includes a built-in switchable phono/line preamp for connection to components with or without a dedicated phono input, and a selector switch to designate operation with a moving magnet or moving coil cartridge.
 
Type  
2-speed, fully manual operation
 
Motor 
DC motor
 
Drive Method Direct Drive  
Belt drive
 
Speeds           
33-1/3 RPM, 45 RPM
 
Turntable Platter     
Polyoxymethylene
 
Wow and Flutter      
<0.2% WRMS (33 RPM) at 3 kHz
 
Signal-to-Noise Ratio
Signal-to-Noise Ratio
 
Output Level 
Pre-amp “PHONO”: 3.5 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE (MM)”: 220 mV nominal at 1 kHz, 5 cm/sec
 
Phono Pre-Amp Gain           
MM: 36 dB nominal, RIAA equalised
MC: 56 dB nominal, RIAA equalised
 
Power Consumption
2W
 
Dimensions   
435mm W x 353mm D x 128mm H
 
Weight           
5.2kg
 
Accessories    
VMN20EB Dual Moving Magnet stereo cartridge with replaceable stylus; AT-HS10 lightweight headshell; power cord; dual RCA (male) to dual RCA (male) stereo cable; 45 RPM adapter; dust cover
 
Replacement Cartridge       
VMN20EB