Inakustik
Referenz LS-4004 AIR Speaker Cable Banana & Spade adaptor (PURE SILVER)
Speaker Cables
Price $57,000
Price $2,600
Includes GST
Voted Australia's #1 Hi-Fi Retailer, Sound+Image Awards 2023. Family owned since 2010.
Hear the Referenz LS-804 AIR Speaker Cable before you decide
Book a private listening session in Belrose and ask for the Referenz LS-804 AIR Speaker Cable: we will confirm what we can set up for you. Or audition it at home.
Free standard shipping on orders of $300 or more within Australia, and $15 on smaller orders. Western Australia is quoted on request.
Pick up from our Belrose showroom: call ahead so we can have it ready.
Our team can deliver, install and set up your system, from speaker placement to a full cinema calibration. Ask us for a quote when you order.
Your rights under Australian Consumer Law always apply. Read our returns policy.
In detail
Our unique AIR-technology impressively demonstrates what high-end cables can achieve in terms of sound. We are now expanding our Reference Selection Series with another top-class loudspeaker cable. For the entry into this class, the sophisticated Air technology is now available for the first time in a flat "ribbon" construction. The Air-Ribbon technology has made it possible to achieve an exquisite sound very efficiently by changing the cable architecture. In the new Reference LS-804 AIR speaker cable, four wires run flat and not helically next to each other, as in the Air Helix cables LS-1204, 2404 and 4004 AIR. In this way, the electrical parameters capacitance and inductance are yet again finely tuned to each other. The division into several smaller, separate conductors also reduces the skin effect. In conjunction with Air technology, i.e. the "omission" of insulation material, which would "absorb" part of the energy like a sponge, even the Reference LS-804 AIR is capable of following very fast impulses. The sophisticated details of the Air technology counteract unwanted cable effects and make it an extraordinary loudspeaker cable. Especially with less monumental amplifiers, the LS-804 AIR harmonizes perfectly and provides relaxed music enjoyment. Like all loudspeaker and audio cables of the Reference series, the Reference LS-804 AIR is completely manufactured in Germany.
With the so-called Air-Ribbon cable, four wires run flat and not helically next to each other, as in the Air-Helix cables LS-1204, 2404 and 4004 AIR. The wires of the LS-804 AIR are also held in position by specially developed clips and cross-connected at both ends of the speaker cable. In this way, the electrical parameters capacitance and inductance are yet again finely tuned to each other. The division into several smaller, separate conductors also reduces the skin effect. In this way, the entire conductor surface area remains usable even at high transmission frequencies. In combination with the Air technology, i.e. the "omission" of insulation material, which would "absorb" part of the energy like a sponge, even the Reference LS-804 AIR is able to follow very fast pulses. The sophisticated details of the Air technology counteract unwanted cable effects and make it an exceptional loudspeaker cable. Especially with less monumental amplifiers, the LS-804 AIR harmonizes perfectly and provides relaxed music enjoyment.
Everyone knows this effect when you take off a sweater with a high synthetic content and it crackles and sparks. The reason for this is that the integrated plastic material stores electrical energy, which is then discharged again. The same happens in the dielectric, the insulation material of a cable. It "absorbs" electrical energy like a sponge and then releases it again later. With an audio cable, however, these are parts of the audio signal. A dimension for this is the cable capacity, i.e. the unwanted storage capacity of the cable. While capacitors are supposed to store energy and have a correspondingly high capacity, the capacity of the cable should be as low as possible. It significantly influences the transmission characteristics through losses and also leads to interactions with the connected electronics. The ideal solution is therefore an air insulation such as the one implemented with the Air-Technology, as this separates the "capacitor plates" of the cable and thus reduces the capacitance. 

The conductor material also plays an important role. Like the Air Helix models, the Reference LS-804 AIR consists of high-purity copper wires braided onto a PE core. A wafer-thin varnish layer on the wires prevents eddy currents within this conductor and additionally protects the copper from oxidation. Another sound-relevant advantage is the bifilar structure of the conductors, which is also realized in air-ribbon technology. It ensures that the magnetic fields generated by the current are partially compensated. This proven design ensures that the conductor behaves neutrally over a particularly wide frequency spectrum.
Like all loudspeaker and audio cables of the reference series, the Reference LS-804 AIR is completely handmade in Germany. The clips are assembled and the conductors are threaded by hand with great care in the in-house factory. The resulting AIR-Ribbon-Structure is then also manually fitted with the PE network jacket before the high-quality connectors are fitted and the cable is checked for proper function.
By appointment
Specifications only tell half the story. Book a private listening session in our Belrose showroom, bring the music you know best, and ask for the Referenz LS-804 AIR Speaker Cable.
Voted Australia's #1 Hi-Fi Retailer, Sound+Image Awards 2023
Inakustik
Speaker Cables
Price $57,000
Inakustik
Speaker Cables
Price $33,500
Inakustik
PURE SILVER
Price From $19,400
Inakustik
XLR Interconnects
Price From $18,500
Inakustik
XLR Interconnects
Price From $14,000
Your cart is empty
Start with a category, or ask us what would suit your room.
Enquiry