Skip to content
Book Your Audition: Call (02) 8088 3088 | Email info@sydneyhifimonavale.com.au
Book Your Audition: Call (02) 8088 3088 | Email info@sydneyhifimonavale.com.au
Free shipping

When you spend $300+

Chat with the team

(02) 8088 3088

Send an email

info@sydneyhifimonavale.com.au

Visit Our Stores

Find our stores

Sydney's Amplifiers Expert

Parasound - ZoneMaster ZM2 - Amplifier

$1,495.00
SKU ZM2

Notify me when back in stock

ZoneMaster 2

  • 120 watts x2 @ 8 Ω
  • 150 watts x2 @ 4 Ω or 2 Ω
  • 4 speaker connections (A and B outputs for both channels)
  • High current for stable operation at 2 Ohms
  • Class AB input stage plus premium Class D power stage
  • Audio sensing auto-on trigger
  • 12 volt auto-on trigger input
  • Looping 12 volt trigger output
  • Speaker level input for expanding systems w/out pre out jacks
  • Looping output to connect additional amplifiers
  • Mono mode combines L and R for single speaker applications
  • Separate level controls for both channels
  • Detachable speaker connectors accept up to 12 gauge wire
  • Short circuit and overheat protection with front panel indicators
  • 0.5 watt standby power consumption meets Energy Star & EU specs
ZoneMaster 2 Specific Features
  • Compact 1u, 1/2 width chassis size
  • Full Range Mono RCA Output
  • 80Hz low pass Mono RCA output (for sub)
  • Built in 80Hz low pass filter in bridged mode for driving in-wall/in-ceiling woofers or passive sub(s)

Specs

Power Output – RMS, Both Channels Driven (20 Hz - 20 kHz)
120 watts x 2 @ 8Ω
150 watts x 2 @ 4Ω or 2Ω

Minimum Speaker Impedance:
A+B Outputs of a Single Channel: 2 Ω

Note: Continuous operation at this minimum impedance might require additional ventilation for the amplifier.

Frequency Response:
20 Hz - 20 kHz, +0/-0.25 dB
5 Hz - 50 kHz, +0/-3 dB

Total Harmonic Distortion:
< 0.05 % at typical listening levels
< 1.0% at full power

Interchannel Crosstalk: 70 dB at 20 kHz

Total Gain: 29 dB (Level controls set to Maximum)

S/N Ratio: >112 dB, input shorted, IHF A-weighted

DC Trigger Requirements: +9 Vdc to +12 Vdc, 5 mA

Audio Trigger Requirements: 2 mV audio signal

Low Pass Crossover: 80 Hz, 18 dB per octave

AC Power Requirement:
300 Watts maximum
30 Watts typical (music playing)
15 Watts idle (no music playing)
0.5 Watts in standby
100-250 VAC 50/60 Hz (automatic)

Dimensions:
Width: 8.5" (220 mm)
Depth: 10" (254 mm)
Depth: 12" (305 mm) with AC cord and cables connected
Height, with feet: 2" (51 mm)
Height, without feet: 1.75" (45 mm), 1U

Weight:
Net: 4.3 lbs. (2.0kg)
Shipping: 7.3 lbs. (3.3 kg)